Free Returns | Free Shipping | 30-Day Money Back Guarantee | Learn More *
Call 800-897-7175 or send and email to [email protected] We're here to help.

Installation Guide

How to Measure For Fireplace Doors

The most important part of a successful door installation is having the right sized door. The first step is measuring your fireplace so that you get the right doors. Here’s how to properly measure your fireplace:

Measure the width and height of the steel opening where the enclosure will fit. This will be the same position that the fireplace manufacturer’s enclosure would be installed. Do not measure the finish material in front of the fireplace; brick, stone, marble, slate, tile, etc.



How to Install Fireplace Doors

Installing your new fireplace doors is easy with just a few tools you probably have around the house. All hardware is included.


Step By Step Installing Doors

  1. Put the brackets on the side panels.
  2. Use the self tapping screws to secure your frame into the firebox opening.
  3. Make sure your frame is even.
  4. After you have secured the frame, put the glass into the frame to complete your fireplace door installation.
  5. Position the frame in the fireplace and center the frame between the left and right side of the fireplace opening.
  6. It is Important that the frame is installed with the correct side up to insure smooth operation of the doors. The bottom frame rail is marked by a red dot.
  7. Slide the brackets on the backside of the frame and position them against your fireplace box. Hand tighten the bracket. Mark the fireplace at each hole in the 4 angle brackets.
  8. Remove the frame, drill the 4 holes your marked with the 5/32 drill bit.
  9. Re-position the frame back into the fireplace and secure the frame using the sheet metal screws using a #2 Phillips screwdriver for each angle bracket making sure you don’t over tighten! The enclosure may be centered by loosening one side and tightening the other.


Frequently Asked Questions

Will I need a professional to install my new doors?

Not at all. If you can hang a picture frame, you can install fireplace doors yourself. The process is easy and can be done with a few common tools.

What tools will I need for installation?

You’ll need an electric drill, drill bits, and a Phillips head screwdriver. If you need help, just give us a call and speak to a member of our customer service team.

What if I run into problems installing my fireplace glass doors?

We stand behind our products. If you have any questions, you can call us at 800-897-7175 and speak to a fireplace door specialist who can help you with any problems you may encounter.